Biological Effects of PMMA and Composite Resins on Human Gingival Fibroblasts: An In Vitro Comparative Study.

The use of temporary resin for provisional restorations is a fundamental step to maintain the position of prepared teeth, to protect the pulpal vitality and the periodontal health as well as the occlusion. The present study aimed at evaluating the biological effects of two resins used in dentistry for temporary restorations, Coldpac (Yates Motloid) and ProTemp 4™ (3M ESPE ™), and their eluates, in an in vitro model of human gingival fibroblasts (hGFs). The activation of the inflammatory pathway NFκB p65/NLRP3/IL-1ß induced by the self-curing resin disks was evaluated by real-time PCR, Western blotting and immunofluorescence analysis. The hGFs adhesion on resin disks was investigated by means of inverted light microscopy and scanning electron microscopy (SEM). Our results suggest that hGF cells cultured in adhesion and with eluate derived from ProTemp 4™ (3M ESPE ™) resin evidenced a downregulation in the expression of the inflammatory mediators such as NFκB p65, NLRP3 and IL-1ß compared to the cells cultured with Coldpac (Yates Motloid) after 24 h and 1 week of culture. Furthermore, the cells cultured with ProTemp 4™ (3M ESPE ™) after 24 h and 1 week of culture reported a higher cell viability compared to the cells cultured with Coldpac (Yates Motloid), established by MTS cell analysis. Similar results were obtained when hGFs were placed in culture with the eluate derived from ProTemp 4™ (3M ESPE ™) resin which showed a higher cell viability compared to the cells cultured with eluate derived from Coldpac (Yates Motloid). These results highlighted the lower pro-inflammatory action and improved cell biocompatibility of ProTemp 4™ (3M ESPE ™), suggesting a better performance in terms of cells-material interaction.

Evaluating the antifungal effectiveness, leaching characteristics, flexural strength, and impact strength of polymethyl methacrylate added with small-scale silver nanoparticles - An in vitro study.

AIM: (1) To assess the release of stable silver nanoparticles (AgNPs) of small scale dimension added to heat polymerized polymethyl methacrylate (PMMA) in 6 months. (2) Assessing the influence of incorporating minimal concentrations of stable AgNPs with nanoscale dimensions into heat polymerized PMMA over a 6 month period on its antifungal efficacy (AF), flexural strength (FS), and impact strength (IS). SETTINGS AND DESIGN: Incorporating nanoparticles with a very small scale may have minimal impact on mechanical properties due to their diminutive size. However, the influence of these small scaled nanoparticles on antimicrobial efficacy and potential escalation in toxicity to host cells through leaching remains unexplored. AgNPs were prepared using an Ultrasonic Probe sonicator and the addition of ammonia to obtain stabilized AgNPs (< 0.01 nm) of small scale dimension. The characterization of these AgNPs involved ultraviolet visible spectroscopy, X ray diffraction, Zetasizer, and transmission electron microscopy with energy dispersive spectroscopy (TEM). MATERIALS AND METHODS: The prepared AgNPs were then added in various percentages by weight (0%-0.5%) to fabricate 252 modified PMMA samples of sizes 10 mm × 3 mm (AF, n = 108), 65 mm × 10 mm × 3 mm (FS, n = 72), and 65 mm × 10 mm × 2.5 mm (IS, n = 72) as per ADA specification no. 12. These samples underwent testing for leaching out of AgNPs and efficacy against Candida albicans for 6 months. The effect on FS and IS was evaluated using the three point bending test and Charpy's Impact Tester, respectively. STATISTICAL ANALYSIS USED: Intergroup comparison of CFU between various concentrations of AgNP was done using the Kruskal-Wallis ANOVA test succeeded by Mann-Whitney test for pair wise comparisons. Difference in CFU of various concentrations over 6 months was seen using one way ANOVA test. Intergroup comparison of FS and IS was performed using a one way ANOVA test, followed by a post hoc Tukey's test for pair wise comparisons. RESULTS: Repeated tests showed no leaching out of AgNPs from the denture base resin into the storage medium. All concentrations of AgNPs incorporated in resin showed inhibition of Candida growth. Intergroup comparison of FS and IS revealed highly statistically significant differences (F = 15.076, P < 0.01 and F = 28.266, P < 0.01) between the groups showing a reduction in strength. CONCLUSION: The AgNPs of small scale dimension incorporated into the denture base resin imparted a strong antifungal effectiveness against C. albicans, which did not decline during the study period and did not cause any release of nanoparticles. 0.5% showed the best antifungal efficacy. This may prove to be a viable and highly effective treatment for the prevention of Candida associated denture stomatitis. However, the inclusion of these particles resulted in a decrease in both FS and IS, and this reduction was directly proportional to the percentage of added AgNPs, with 0.5% demonstrating the least IS and FS.

Preclinical Evaluation of Bioactive Small Intestinal Submucosa-PMMA Bone Cement for Vertebral Augmentation.

In vertebroplasty and kyphoplasty, bioinert poly(methyl methacrylate) (PMMA) bone cement is a conventional filler employed for quick stabilization of osteoporotic vertebral compression fractures (OVCFs). However, because of the poor osteointegration, excessive stiffness, and high curing temperature of PMMA, the implant loosens, the adjacent vertebrae refracture, and thermal necrosis of the surrounding tissue occurs frequently. This investigation addressed these issues by incorporating the small intestinal submucosa (SIS) into PMMA (SIS-PMMA). In vitro analyses revealed that this new SIS-PMMA bone cement had improved porous structure, as well as reduced compressive modulus and polymerization temperature compared with the original PMMA. Furthermore, the handling properties of SIS-PMMA bone cement were not significantly different from PMMA. The in vitro effect of PMMA and SIS-PMMA was investigated on MC3T3-E1 cells via the Transwell insert model to mimic the clinical condition or directly by culturing cells on the bone cement samples. The results indicated that SIS addition substantially enhanced the proliferation and osteogenic differentiation of MC3T3-E1 cells. Additionally, the bone cement's biomechanical properties were also assessed in a decalcified goat vertebrae model with a compression fracture, which indicated the SIS-PMMA had markedly increased compressive strength than PMMA. Furthermore, it was proved that the novel bone cement had good biosafety and efficacy based on the International Standards and guidelines. After 12 weeks of implantation, SIS-PMMA indicated significantly more osteointegration and new bone formation ability than PMMA. In addition, vertebral bodies with cement were also extracted for the uniaxial compression test, and it was revealed that compared with the PMMA-implanted vertebrae, the SIS-PMMA-implanted vertebrae had greatly enhanced maximum strength. Overall, these findings indicate the potential of SIS to induce efficient fixation between the modified cement surface and the host bone, thereby providing evidence that the SIS-PMMA bone cement is a promising filler for clinical vertebral augmentation.

Preparation and characterizations of antibacterial poly(methyl methacrylate) bone cement via copolymerization with a quaternary ammonium monomer of dimethylaminotriclosan methacrylate.

Poly (methyl methacrylate) (PMMA) bone cement relies on the loaded antibiotic to realize the antibacterial purpose. But the exothermic behavior during setting often makes temperature-sensitive antibiotics inactivated. It is necessary to develop new material candidates to replace antibiotics. In this study, a new quaternary ammonium methacrylate (QAM) monomer called dimethylaminetriclosan methacrylate (DMATCM) was designed by the quaternization between 2-(Dimethylamino)ethyl methacrylate and triclosan, then employed as the modifier to explore the feasibility of equipping bone cement with antibacterial activity, and to investigate the variations on the physical and biological performances brought by the substitution ratio of DMATCM to MMA. Results showed that DMATCM opened its C=C bonding to participate in the MMA polymerization, and the quaternary ammonium group helped it to perform broad-spectrum antibacterial property against both Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. With an increased substitution ratio of DMATCM to MMA, the glass transition temperatures, the maximum exothermic temperatures, and the contact angles of bone cements declined, but the residual monomer contents, the fluid uptakes, and the setting times under Vical indentation increased. Long-term soaking made almost no changes to the weight loss and the mechanical properties of DMATCM-modified cements with lower substitution ratios of 0∼20%, and the activation rather enhanced the strengths of uncured AMBC-4 and AMBC-5 samples. Owing to more DMATCM exposed on the cement surface, the inhibition ring diameter produced by modified cement was improved to a maximum of 28.09 mm, and MC3T3-E1 cells performed the cell viabilities all beyond 70% and healthy adhesion after 72 h co-culturing. Taking all measured properties and ISO standards into account, the antibacterial bone cement under the ratio of 10% performed better, besides its good bactericidal effect, the other properties satisfied the requirements for clinical application.

Electrospun Tamarindus indica-loaded antimicrobial PMMA/cellulose acetate/PEO nanofibrous scaffolds for accelerated wound healing: In-vitro and in-vivo assessments.

In this work, Tamarindus indica (T. indica)-loaded crosslinked poly(methyl methacrylate) (PMMA)/cellulose acetate (CA)/poly(ethylene oxide) (PEO) electrospun nanofibers were designed and fabricated for wound healing applications. T. indica is a plant extract that possesses antidiabetic, antimicrobial, antioxidant, antimalarial and wound healing properties. T. indica leaves extract of different concentrations were blended with a tuned composition of a matrix comprised of PMMA (10 %), CA (2 %) and PEO (1.5 %), and were electrospun to form smooth, dense and continuous nanofibers as illustrated by SEM investigation. In vitro evaluation of T. indica-loaded nanofibers on normal human skin fibroblasts (HBF4) revealed a high compatibility and low cytotoxicity. T. indica-loaded nanofibers significantly increased the healing activity of scratched HBF4 cells, as compared to the free plant extract, and the healing activity was significantly enhanced upon increasing the plant extract concentration. Moreover, T. indica-loaded nanofibers demonstrated significant antimicrobial activity in vitro against the tested microbes. In vivo, nanofibers resulted in a superior wound healing efficiency compared to the control untreated animals. Hence, engineered nanofibers loaded with potent phytochemicals could be exploited as an effective biocompatible and eco-friendly antimicrobial biomaterials and wound healing composites.

Evaluation of silver nanoparticle-impregnated PMMA loaded with vancomycin or gentamicin against bacterial biofilm formation.

INTRODUCTION: Bone cement containing vancomycin or gentamicin is a therapeutic strategy for combating orthopedic infections: however, the activity of these antibiotics is narrow. Silver nanoparticles (AgNPs) are nanocomponents with a wide spectrum, including multidrug-resistant bacteria. In the present study, we aimed to evaluate the effect of AgNP-loaded polymethylmethacrylate (PMMA) on biofilm formation by Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus epidermidis. METHODS: The effect of AgNP-loaded PMMA with and without vancomycin or gentamicin on biofilm production was quantitatively analyzed. S. aureus, E. coli, P. aeruginosa, and S. epidermidis were included as biofilm-producing microorganisms in the in vitro model. RESULTS: AgNP-loaded PMMA with antibiotics reduced the number of colony-forming units (CFUs; p<0.001). However, AgNP-loaded PMMA alone did not significantly reduce biofilm formation. CONCLUSION: Our study demonstrated the potential of AgNP-loaded PMMA. Notably, we observed that AgNP-loaded PMMA containing vancomycin or gentamycin exhibited significantly superior efficacy, with satisfactory activity against most biofilm-forming microbial agents examined.

Comparative bone healing with induced membrane technique (IMT) versus empty defects in septic and aseptic conditions in a novel rabbit humerus model.

BACKGROUND: Long bone defects resulting from primary trauma or secondary to debridement of fracture-related infection (FRI) remain a major clinical challenge. One approach often used is the induced membrane technique (IMT). The effectiveness of the IMT in infected versus non-infected settings remains to be definitively established. In this study we present a new rabbit humerus model and compare the IMT approach between animals with prior infection and non-infected equivalents. METHODS: A 5 mm defect was created in the humerus of New Zealand White rabbits (n = 53) and fixed with a 2.5 mm stainless steel plate. In the non-infected groups, the defect was either left empty (n = 6) or treated using the IMT procedure (PMMA spacer for 3 weeks, n = 6). Additionally, both approaches were applied in animals that were inoculated with Staphylococcus aureus 4 weeks prior to defect creation (n = 5 and n = 6, respectively). At the first and second revision surgeries, infected and necrotic tissues were debrided and processed for bacteriological quantification. In the IMT groups, the PMMA spacer was removed 3 weeks post implantation and replaced with a beta-tricalcium phosphate scaffold and bone healing observed for a further 10 weeks. Infected groups also received systemic antibiotic therapy. The differences in bone healing between the groups were evaluated radiographically using a modification of the radiographic union score for tibial fractures (RUST) and by semiquantitative histopathology on Giemsa-Eosin-stained sections. RESULTS: The presence of S. aureus infection at revision surgery was required for inclusion to the second stage. At the second revision surgery all collected samples were culture negative confirming successful treatment. In the empty defect group, bone healing was increased in the previously infected animals compared with non-infected controls as revealed by radiography with significantly higher RUST values at 6 weeks (p = 0.0281) and at the end of the study (p = 0.0411) and by histopathology with increased cortical bridging (80% and 100% in cis and trans cortical bridging in infected animals compared to 17% and 67% in the non-infected animals). With the IMT approach, both infected and non-infected animals had positive healing assessments. CONCLUSION: We successfully developed an in vivo model of bone defect healing with IMT with and without infection. Bone defects can heal after an infection with even better outcomes compared to the non-infected setting, although in both cases, the IMT achieved better healing.

Puricelli biconvex arthroplasty: an experimental study in sheep.

BACKGROUND: The aim of this study was to establish a sheep model of the Puricelli biconvex arthroplasty (ABiP) technique in sheep for evaluating its functional, biological and histological parameters. METHODS: Ten Corriedale black sheep were submitted to TMJ total reconstruction with poly(methyl methacrylate) (PMMA) using ABiP and euthanized after 45 (n = 5) or 90 (n = 5) days. Control animals (n = 2) underwent sham operations and were euthanized after 45 days. Variables were assessed before the surgery (T0), immediately after (T1) and at 45 or 90 postoperative days (T2). RESULTS: Histological analyses showed regression of inflammatory cells over the follow-up period. PMMA showed reduced porosity and roughness in the articular contact area. PMMA temporal components showed linear and volumetric wear in comparison to control, but no foreign body reaction was observed. The reconstructions were stable in all animals. The amplitude of mouth opening and left lateral movements were maintained, except for a reduction in the range of right lateral movements at day 90 in the experimental group. Clinical, macroscopic and radiographic observations showed that the reconstructions were stable. CONCLUSIONS: The analysis of functional, biological and histological parameters in sheep submitted to ABiP showed stable results of the procedure, with maintenance of body weight and all mandibular movements, save contralateral mandibular movement, suggesting that joint function was completely maintained following the procedure. This experimental study provides support for clinical results previously reported of the ABiP technique in TMJ reconstruction procedures.

Galactomannan-graft-poly(methyl methacrylate) nanoparticles induce an anti-inflammatory phenotype in human macrophages.

Macrophages are immune cells that can be activated into either pro-inflammatory M1 or anti-inflammatory M2 phenotypes. Attempts to modulate macrophage phenotype using drugs have been limited by targeting issues and systemic toxicity. This study investigates the effect of drug-free self-assembled hydrolyzed galactomannan-poly(methyl methacrylate) (hGM-g-PMMA) nanoparticles on the activation of the human monocyte-derived macrophage THP-1 cell line. Nanoparticles are cell compatible and are taken up by macrophages. RNA-sequencing analysis of cells exposed to NPs reveal the upregulation of seven metallothionein genes. Additionally, the secretion of pro-inflammatory and anti-inflammatory cytokines upon exposure of unpolarized macrophages and M1-like cells obtained by activation with lipopolysaccharide + interferon-γ to the NPs is reduced and increased, respectively. Finally, nanoparticle-treated macrophages promote fibroblast migration in vitro. Overall, results demonstrate that hGM-g-PMMA nanoparticles induce the release of anti-inflammatory cytokines by THP-1 macrophages, which could pave the way for their application in the therapy of different inflammatory conditions, especially by local delivery.

ATF2-driven osteogenic activity of enoxaparin sodium-loaded polymethylmethacrylate bone cement in femoral defect regeneration.

BACKGROUND: Polymethylmethacrylate (PMMA) bone cement loaded with enoxaparin sodium (PMMA@ES) has been increasingly highlighted to affect the bone repair of bone defects, but the molecular mechanisms remain unclear. We addressed this issue by identifying possible molecular mechanisms of PMMA@ES involved in femoral defect regeneration based on bioinformatics analysis and network pharmacology analysis. METHODS: The upregulated genes affecting the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) were selected through bioinformatics analysis, followed by intersection with the genes of ES-induced differentiation of BMSCs identified by network pharmacology analysis. PMMA@ES was constructed. Rat primary BMSCs were isolated and cultured in vitro in the proliferation medium (PM) and osteogenic medium (OM) to measure alkaline phosphatase (ALP) activity, mineralization of the extracellular matrix, and the expression of RUNX2 and OCN using gain- or loss-of-function experiments. A rat femoral bone defect model was constructed to detect the new bone formation in rats. RESULTS: ATF2 may be a key gene in differentiating BMSCs into osteoblasts. In vitro cell assays showed that PMMA@ES promoted the osteogenic differentiation of BMSCs by increasing ALP activity, extracellular matrix mineralization, and RUNX2 and OCN expression in PM and OM. In addition, ATF2 activated the transcription of miR-335-5p to target ERK1/2 and downregulate the expression of ERK1/2. PMMA@ES induced femoral defect regeneration and the repair of femoral defects in rats by regulating the ATF2/miR-335-5p/ERK1/2 axis. CONCLUSION: The evidence provided by our study highlighted the ATF2-mediated mechanism of PMMA@ES in the facilitation of the osteogenic differentiation of BMSCs and femoral defect regeneration.

Could Helium Plasma Treatment be a Novel Approach to Prevent the Biofilm Formation of Candida albicans?

There is no definitive method to prevent Candida albicans (C. albicans) biofilm formation on polymethyl methacrylate (PMMA) surfaces. The objective of this study was to evaluate the effect of Helium plasma treatment (before the application of removable dentures to the patient) to prevent or reduce C. albicans ATCC 10,231 the anti-adherent activity, viability, and biofilm formation on PMMA surfaces. One hundred disc-shaped PMMA samples (2 mm × 10 mm) were prepared. The samples were randomly divided into 5 surface groups and treated with different concentrations of Helium plasma: G I: Control group (untreated), G II: 80% Helium plasma-treated group, G III: 85% Helium plasma-treated group, G IV: 90% Helium plasma-treated group, G V: 100% Helium plasma-treated group. C. albicans viability and biofilm formations were evaluated using 2 methods: MTT (3-(4,5-dimethyl thiazolyl-2)-2, 5-diphenyltetrazolium bromide) assays and Crystal Violet (CV) staining. The surface morphology and C. albicans biofilm images were observed with scanning electron microscopy. The Helium plasma-treated PMMA groups (G II, G III, G IV, G V) observed a significant reduction in C. albicans cell viability and biofilm formation compared with the control group. Treating PMMA surfaces with different concentrations of Helium plasma prevents C. albicans viability and biofilm formation. This study suggests that Helium plasma treatment might be an effective strategy in modifying PMMA surfaces to prevent denture stomatitis formation.

A composite of polymethylmethacrylate, hydroxyapatite, and ß-tricalcium phosphate for bone regeneration in an osteoporotic rat model.

The purpose of this study was to test several modifications of the polymethylmethacrylate (PMMA) bone cement by incorporating osteoconductive and biodegradable materials for enhancing bone regeneration capacity in an osteoporotic rat model. Three bio-composites (PHT-1 [80% PMMA, 16% HA, 4% ß-TCP], PHT-2 [70% PMMA, 24% HA, 6% ß-TCP], and PHT-3 [30% PMMA, 56% HA, 14% ß-TCP]) were prepared using different concentrations of PMMA, hydroxyapatite (HA), and ß-tricalcium phosphate (ß-TCP). Their morphological structure was then examined using a scanning electron microscope (SEM) and mechanical properties were determined using a MTS 858 Bionics test machine (MTS, Minneapolis, MN, USA). For in vivo studies, 35 female Wister rats (250 g, 12 weeks of age) were prepared and divided into five groups including a sham group (control), an ovariectomy-induced osteoporosis group (OVX), an OVX with pure PMMA group (PMMA), an OVX with PHT-2 group (PHT-2), and an OVX with PHT-3 group (PHT-3). In vivo bone regeneration efficacy was assessed using micro-CT and histological analysis after injecting the prepared bone cement into the tibial defects of osteoporotic rats. SEM investigation showed that the PHT-3 sample had the highest porosity and roughness among all samples. In comparison to other samples, the PHT-3 exhibited favorable mechanical properties for use in vertebroplasty procedures. Micro-CT and histological analysis of OVX-induced osteoporotic rats revealed that PHT-3 was more effective in regenerating bone and restoring bone density than other samples. This study suggests that the PHT-3 bio-composite can be a promising candidate for treating osteoporosis-related vertebral fractures.

Anti-multispecies microbial biofilms and anti-inflammatory effects of antimicrobial photo-sonodynamic therapy based on acrylic resin containing nano-resveratrol.

BACKGROUND: Polymethylmethacrylate (PMMA)-based removable orthodontic appliances are susceptible to microbial colonization due to the surface porosity, and accumulating the biofilms causes denture stomatitis. the present study evaluated the anti-biofilm and antiinflammatory effects of antimicrobial photo-sonodynamic therapy (aPSDT) against multispecies microbial biofilms (Candida albicans, Staphylococcus aureus, Streptococcus sobrinus, and Actinomyces naeslundii) formed on acrylic resin modified with nanoresveratrol (NR). MATERIALS AND METHODS: Following the determination of the minimum biofilm inhibitory concentration (MBIC) of NR, in vitro anti-biofilm activity of NR was evaluated. The antibiofilm efficacy against multispecies microbial biofilm including C. albicans, S. aureus, S. sobrinus, and A. naeslundii, were assessed by biofilm inhibition test and the results were measured. To reveal the anti-inflammatory effects of aPSDT on human gingival fibroblast (HGF) cells, the gene expression levels of tumor necrosis factor-α (TNF-α) and interleukin-6 (IL-6) were evaluated via quantitative real-time polymerase chain reaction (qRT-PCR). RESULTS: According to the results, the MBIC dose of NR against multispecies microbial biofilm was considered 512 µg/mL. The highest biofilm reduction activity was observed in MBIC treated with aPSDT and 2 × MBIC exposed to light emitting diode (LED) and ultrasound waves (UW). The expression level of TNF-α and IL-6 genes were significantly increased when HGF cells were exposed to multispecies microbial biofilms (P<0.05), while after treatment with aPSDT, the expression levels of genes were significantly downregulated in all groups (P<0.05). CONCLUSION: Overall, NR-mediated aPSDT reduced the growth of the multispecies microbial biofilm and downregulated the expression of TNF-α and IL-6 genes. Therefore, modified PMMA with NR can be serving as a promising new orthodontic acrylic resin against multispecies microbial biofilms and the effect of this new material is amplified when exposed to LED and UW.

The adverse impact of microplastics and their attached pathogen on hemocyte function and antioxidative response in the mussel Mytilus galloprovincialis.

Microplastics (MPs) are widely distributed in marine environments, and they are easily attached by various microorganisms, including pathogenic bacteria. When bivalves mistakenly eat MPs, pathogenic bacteria attached to MPs enter their bodies through the Trojan horse effect, causing adverse effects. In this study, the mussel Mytilus galloprovincialis was exposed to aged polymethylmethacrylate MPs (PMMA-MPs, 20 µm) and Vibrio parahaemolyticus attached to PMMA-MPs to explore the effect of synergistic exposure by measuring lysosomal membrane stability, ROS content, phagocytosis, apoptosis in hemocytes, antioxidative enzyme activities and apoptosis-related gene expression in gills and digestive glands. The results showed that MP exposure alone did not cause significant oxidative stress in mussels, but after long-term coexposure to MPs and V. parahaemolyticus, the activities of antioxidant enzymes were significantly inhibited in the gills of mussels. Both single MP exposure and coexposure will affect hemocyte function. Coexposure can induce hemocytes to produce higher ROS, improve phagocytosis, significantly reduce the stability of the lysosome membrane, and induce the expression of apoptosis-related genes, causing apoptosis of hemocytes compared with single MP exposure. Our results demonstrate that MPs attached to pathogenic bacteria have stronger toxic effects on mussels, which also suggests that MPs with pathogenic bacteria might have an influence on the immune system and cause disease in mollusks. Thus, MPs may mediate the transmission of pathogens in marine environments, posing a threat to marine animals and human health. This study provides a scientific basis for the ecological risk assessment of MP pollution in marine environments.

Antifungal efficiency and cytocompatibility of polymethyl methacrylate modified with zinc dimethacrylate.

Objectives: Considering the high incidence rates of denture stomatitis, research that providing dental biomaterials with antifungal property are essential for clinical dentistry. The objectives of the present study were to investigate the effect of zinc dimethacrylate (ZDMA) modification on the antifungal and cytotoxic properties, as well as the variance in surface characteristics and other physicochemical properties of polymethyl methacrylate (PMMA) denture base resin. Methods: PMMA with various mass fraction of ZDMA (1 wt%, 2.5 wt% and 5 wt%) were prepared for experimental groups, and unmodified PMMA for the control. Fourier-transform infrared spectroscopy (FTIR) was applied for characterization. Thermogravimetric analysis, atomic force microscopy and water contact angle were performed to investigate the thermal stability and surface characteristics (n=5). Antifungal capacities and cytocompatibility were evaluated with Candida albicans (C. albicans) and human oral fibroblasts (HGFs), respectively. Colony-forming unit counting, crystal violet assay, live/dead biofilm staining and scanning electron microscopy observation were performed to assess antifungal effects, and the detection of intracellular reactive oxygen species production was applied to explore the possible antimicrobial mechanism. Finally, the cytotoxicity of ZDMA modified PMMA resin was evaluated by the 3-(4,5-dimethyl-thiazol-2-yl)-2,5-diphenyl-tetrazolium bromide (MTT) assay and live/dead double staining. Results: The FTIR analyses confirmed some variation in chemical bonding and physical blend of the composites. Incorporation of ZDMA significantly enhanced the thermal stability and hydrophilicity compared with unmodified PMMA (p < 0.05). The surface roughness increased with the addition of ZDMA while remained below the suggested threshold (≤ 0.2 µm). The antifungal activity significantly improved with ZDMA incorporation, and cytocompatibility assays indicated no obvious cytotoxicity on HGFs. Conclusions: In the present study, the ZDMA mass fraction up to 5 wt% in PMMA performed better thermal stability, and an increase in surface roughness and hydrophilicity without enhancing microbial adhesion. Moreover, the ZDMA modified PMMA showed effective antifungal activity without inducing any cellular side effects.

Influence of contemporary photoactivated disinfection on the mechanical properties and antimicrobial activity of PMMA denture base: A systematic review and meta analysis.

PURPOSE: The present study aimed to perform a systematic review and meta-analysis to investigate the effectiveness of the contemporary photoactivated disinfection methods on the mechanical features and/or antimicrobial activity of polymethyl methacrylate (PMMA) dentures bases. METHODS: THE FOCUSED RESEARCH QUESTION WAS: "What is the effect of contemporary photoactivated disinfection methods as compared to conventional disinfection protocols on the mechanical features and/or antimicrobial activity of PMMA dentures bases?". An electronic literature search was carried out by the author and a senior librarian specialized in health sciences on Web of Science, PubMed, and Scopus. In vitro investigations evaluating the antimicrobial and/or mechanical effects of photoactivated disinfectants as compared to conventional chemical disinfectants on the microbes formed on PMMA denture bases were included. Meta-analysis was performed for calculating the standard mean difference (SMD) with a 95% confidence interval. RESULTS: Four out of eight studies concluded that photoactivated disinfectants, including riboflavin-mediated photodynamic therapy (PDT), hematoporphyrin-mediated PDT, poly-l-glycolic acid loaded with methylene blue, Erbium, chromium-doped yttrium, scandium, gallium, and garnet (Er,Cr:YSGG) laser, erbium-doped yttrium-aluminum-garnet (Er:YAG) laser, and chitosan-mediated PDT, demonstrated a significant reduction in colony-forming unit per milliliter (CFU/mL) of exposed viable colonies of Escherichia coli (E. coli), Streptococcus mutans (S. mutans), Staphylococcus aureus (S. aureus), and Candida albicans (C. albicans) comparable to the conventionally used chemical disinfectants of PMMA denture bases. Contrarily, two studies concluded that the PMMA denture base colonized with C. albicans and disinfected with conventional chemical disinfectants showed the greatest anti-fungal efficaciousness. All the included studies concluded that the application of photoactivated disinfectants does not negatively impact the mechanical features of the PMMA denture bases colonized with microbes including E. coli, S. mutans, S. aureus, and C. albicans. The meta-analysis revealed statistically significant reduction in C. albicans counts (CFU/mL [Log10]) (p < 0.00001) and improvement in the flexural strength (p = 0.0002) of PMMA-based denture base after the application of conventional disinfectants, while a statistically significant improvement in the fracture strength of PMMA-based denture base was observed after the application of photoactivated disinfectants (p = 0.03). CONCLUSION: According to the systematic review (qualitative synthesis), photoactivated disinfectants demonstrated comparable mechanical features and antimicrobial activity of PMMA dentures bases to conventional chemical disinfectants suggesting their potential to be utilized as an alternative to conventional chemical disinfectants. However, the meta-analysis (quantitative synthesis) revealed that the application of conventional disinfectants demonstrated better outcomes related to antimicrobial activity and flexural strength of PMMA-based denture based.

In vitro elution characteristics of antibiotic-loaded polymethylmethacrylate cement and a calcium sulfate bone substitute using staphylococci isolated from orthopedic implant-associated infections.

Polymethylmethacrylate (PMMA) remains the gold standard antibiotic carrier in the management of osteomyelitis. However, biodegradable ceramic carriers may exhibit more efficient antibiotic elution properties. Through zone of inhibition (ZOI) testing and biofilm killing assays, we assessed the in vitro elution efficacy of vancomycin released from calcium sulfate (PG-CSH) and PMMA beads as carriers on clinical strains of Staphylococcus aureus and Staphylococcus epidermidis, which were isolated from sonication fluid of orthopedic implant-associated infections. Overall, vancomycin-loaded PMMA and PG-CSH beads showed potency (ZOI above 4 cm2 ) for up to 14 days against ATCC and clinical strains. Vancomycin-loaded PG-CSH beads displayed higher rates, exhibited a more stable antibiotic elution, had greater impacts on bacterial colony-forming unit counts and produced higher ZOIs; additionally, statistically significant differences (Student's t test) were observed in different time sets during the experiment. In the biofilm killing assay, PG-CSH loaded with vancomycin resulted in more bacterial deaths. In conclusion, in the present study, both PG-CSH and PMMA beads acted as good carriers, but greater antimicrobial elution and biofilm bacterial killing were observed with PG-CSH than PMMA. Future in vitro research should focus on testing other difficult-to-treat clinical strains, including multidrug resistant coagulase-negative staphylococci and Gram-negative bacilli.

Polymer Chemical Identity as a Key Factor in Microplastic-Insecticide Antagonistic Effects during Embryogenesis of Sea Urchin Arbacia lixula.

As a proxy for pollutants that may be simultaneously present in urban wastewater streams, the effects of two microplastics-polystyrene (PS; 10, 80 and 230 µm diameter) and polymethylmethacrylate (PMMA; 10 and 50 µm diameter)-on fertilisation and embryogenesis in the sea urchin Arbacia lixula with co-exposure to the pyrethroid insecticide cypermethrin were investigated. Synergistic or additive effects were not seen for plastic microparticles (50 mg L-1) in combination with cypermethrin (10 and 1000 µg L-1) based on evaluation of skeletal abnormalities or arrested development and death of significant numbers of larvae during the embryotoxicity assay. This behaviour was also apparent for male gametes pretreated with PS and PMMA microplastics and cypermethrin, where a reduction in sperm fertilisation ability was not evidenced. However, a modest reduction in the quality of the offspring was noted, suggesting that there may be some transmissible damage to the zygotes. PMMA microparticles were more readily taken up than PS microparticles, which could suggest surface chemical identity as potentially modulating the affinity of larvae for specific plastics. In contrast, significantly reduced toxicity was noted for the combination of PMMA microparticles and cypermethrin (100 µg L-1), and may be related to less ready desorption of the pyrethroid than PS, as well as cypermethrin activating mechanisms that result in reduced feeding and hence decreased ingestion of microparticles.

Time-varying characteristics of the induced membrane and its effects on bone defect repair.

PURPOSE: This study intended to determine the properties of induced membranes after various periods of polymethyl methacrylate (PMMA) retention and the effect of different retention intervals on subsequent defect repair. METHODS: Model of a critical bone defect in rabbits was prepared to obtain the induced membrane. For varying intervals of spacer insertion (2, 4, 6, 8, 12, 16, and 20 weeks postoperatively), angiogenesis, osteogenesis, and MSC-related properties were analyzed by immunohistochemistry and western-blot. Furthermore, 2, 4, 6, and 8 weeks after PMMA insertion, bone grafting was performed. Characteristics of defect repair were analyzed by X-ray and micro-CT analysis. RESULTS: The induced membrane displayed angiogenesis, osteogenesis, and MSC-related properties from the 2- to 20-week intervals. Quantitation of protein expression (RUNX2, ALP, VEGF, TGF-beta, OCT4, and STRO1) revealed that selected proteins gradually rose to a high level at 4-8 weeks postoperatively and then decreased to a low level over a long time period. Following bone grafting, the most new bone formation was in the group when grafting was performed at 4 weeks, followed by the groups at 2 and 6 weeks, with the least in the group at 8 weeks. CONCLUSION: The induced membrane displays angiogenesis, osteogenesis, and MSC-related properties from the 2- to 20-week intervals. These were increased to a peak level at 4-8 weeks postoperatively and then gradually decreased. The optimal timing for bone grafting at the second stage in the presented model was 4 weeks after PMMA insertion.

2-methacryloyloxyethyl phosphorylcholine polymer treatment prevents Candida albicans biofilm formation on acrylic resin.

PURPOSE: We aimed to evaluate the effectiveness of photoreactive 2-methacryloyloxyethyl phosphorylcholine (MPC) in inhibiting Candida albicans biofilm formation on polymethyl methacrylate (PMMA) and assess its mechanism and need for re-application by evaluating its interaction with salivary mucin and durability during temperature changes. METHODS: PMMA discs were used as specimens. The MPC coating was applied using the spray and cure technique for the treatment groups, whereas no coating was applied to the control. The MPC treatment (MT) groups were further differentiated based on the number of thermal cycles involved (0, 1000, 2500, and 5000). The optical density was measured to assess mucin adsorption (MA). Contact angle (CA) was calculated to evaluate surface hydrophilicity. The presence of MPC components on the PMMA surface was assessed using X-ray photoelectron spectroscopy (XPS). C. albicans biofilms were evaluated qualitatively (scanning electron microscope images) and quantitatively (colony-forming units (CFUs)). Statistical analysis was conducted using two-way analysis of variance and Tukey's multiple comparison test. RESULTS: MA rate and CA increased significantly in the MT groups, which exhibited significantly fewer CFUs and thinner biofilms than those of the control group. Based on the XPS, MA, and CFU evaluations, the durability and efficacy of the MPC coating were considered stable up to 2500 thermal cycles. Additionally, a significant interaction was observed between mucin concentration and MPC efficacy. CONCLUSIONS: The photoreactive MPC coating, which was resistant to temperature changes for approximately 3 months, effectively prevented C. albicans biofilm formation by modifying surface hydrophilicity and increasing mucin adsorption.